9 inch Willett pump before restoration 9 inch Willett pump after restoration by L & R Site Services Gear before restoration Gear after restoration by L & R Site Services Refurbished 9 inch Willett pump for sale
L & R Site Services Ltd

Refurbished pumps, rebuilt to a higher standard.

Specialists in the refurbishment of Willett ram pumps and hydraulic power packs — alongside filter presses, belt presses and solids thickeners — with in-house blasting at our Stoke-on-Trent workshop.

Est. 2010Family run · Stoke-on-Trent
30+ yearsIn the dewatering industry
WorldwideService & support

Bought, refurbished, installed and commissioned.

Services offered worldwide and supported across nine process industries. No job too small — from a single pump to a full plant refit.

01

We buy your used machinery

L & R Site Services is always on the lookout for machinery and equipment that is no longer needed in your company. If you are looking to dispose of redundant plant, give us a call to see what we can do for you.

  • Filter presses
  • Willett & diaphragm pumps
  • Belt presses & vibro screens
  • Process equipment
02

Refurbishment of your equipment

We refurbish all equipment to the highest standard. Quality refurbishments reduce the capital outlay of new equipment and lower your operating costs.

  • Stripped, shot blasted, primed & painted
  • Rebuilt with new pillars, ram, balls, seats & seals
  • New hoses and valves
  • Hydraulic pumps replaced, tested or fixed
  • Top hat conversion if required
03

Service, repair & spares

Our services don’t stop at refurbishment. We service and maintain your equipment and supply the spares needed to keep it running.

  • Filter cloths & filter belts
  • Press spares & pump spares
  • Workshop & site repair work
  • Fabrication work
04

Removal, installation & commissioning

From a single pump to a full plant refit — we design the layout, manage the project and commission it on site, worldwide.

  • Removal & installation of plant and equipment
  • Plant layout design & project management
  • Commissioning — process, mechanical, electrical
  • PLC software written & commissioned

Industries supported

Water & Waste Water Brewing Mining Food Chemical Ceramic Industrial Effluent Petrochemical Pharmaceutical
  • +Sale of refurbished equipment
  • +Upgrade of customers’ equipment
  • +Service & repair of equipment
  • +Spare parts
  • +Removal of plant & equipment
  • +Installation of plant & equipment
  • +Design of plant layout & project management
  • +Commissioning — process, mechanical, electrical
Refurbished Willett pump in stock at L & R Site Services

Refurbished pumps, in stock now.

Willett pumps with hydraulic power packs, fully refurbished or awaiting refurbishment to your specification. Our stock is continuously changing — tell us your requirements and we will check the workshop.

Willett pumps Hydraulic power packs Diaphragm pumps Filter presses Belt presses Vibro screens
01

2 × Willett ball valve pumps

With power packs · contact for spec info & price

02

4 × Willett stalk valve pumps

With power packs · contact for spec info & price

03

1 × 9″ Willett pump — fully refurbished

With hydraulic power pack · ready to go · contact for spec info & price

04

2 × 9″ Willett pumps — awaiting refurbishment

With power packs · contact for spec info & price

Listed stock changes regularly. Please contact us for specification and price.

Soda blasting in the L & R Site Services workshop Soda blasted component in the L & R Site Services workshop

In-house soda blasting.

Soda, Restofine and glass bead blasting carried out in our dedicated blasting facility at the Stoke-on-Trent workshop.

ARMEX® blast media

Soda blasting

A formulated sodium bicarbonate abrasive applied at comparatively low pressure and high velocity. The crystals shatter on impact, transferring their energy into a powerful stripping action that removes coatings and contaminants without damage or distortion to the surface. Biodegradable, non-toxic and non-hazardous.

Cost effective fine media

Restofine blasting

A fine media applied against the surface using compressed air — a cost effective alternative to soda blasting. Used for the removal of paint and rust, leaving an etched, keyed surface that is ideal for priming.

Recycled crushed glass

Glass bead blasting

Fine glass beads applied at high pressure, removing surface deposits without damaging the component. Ideal on stainless steel, but also used on other metals, glass, plastic and rubber — leaving a smooth, bright satin finish without affecting the shape.

What we blast

  • +Pumps & pump assemblies
  • +Filter press plates
  • +Industrial process equipment
  • +Food process equipment

Suitable for metal, wood, rubber, fibreglass and polypropylene — soda is soft pelletised media that does not etch or damage the surface being blasted.

Workshop diary.

A selection of the pumps, presses and process equipment that have passed through the workshop recently.

Refurbishment projects

05
  • 6″ Willett pump refurbishment
  • 9″ Thomas Willett pump refurbishment
  • Filter press refurbishment
  • Mobile filter press refurbishment
  • 48″ Boulton single deck vibroscreens

Blasting projects

02
  • Food process equipment
  • Polypropylene plates
Refurbished pump in the L & R Site Services workshop

“Quality refurbishments can reduce the capital outlay of new equipment, reducing your operating costs.”

L & R Site Services — Unit 21G, Blythe Business Park

A small family run business, on purpose.

L & R Site Services: what we do
Established
April 2010
Workshop
Blythe Business Park, Cresswell
Facilities
  • Soda, Restofine & glass bead blasting
  • Shot blasting, priming & spray painting
  • Strip-down & full rebuild workshop
  • Hydraulic pump & power pack testing
  • Fabrication
  • Site repair & commissioning team

L & R Site Services was established in April 2010. We are a small family run business situated on the outskirts of Stoke-on-Trent, Staffordshire.

We specialise in the refurbishment of equipment at our workshop on Blythe Business Park in Cresswell, fully equipped with everything needed to ensure that the refurbishment of machinery is carried out to the highest standard. Part of our workshop houses an in-house blasting and spraying facility.

I have been associated with the dewatering process industry for over 30 years, mainly with filter presses and pumps. Whether you are on the lookout for refurbished equipment or need your existing machinery refurbished, you can be rest assured the work is carried out to the highest standard.

The advantage of being a small family run business is the key to our success. Unlike some of the bigger companies you will always have a main source of contact — there is nothing worse than being put on hold whilst being transferred to the correct department.

Whilst working on your equipment we liaise with our customers so they know exactly what is happening with their machines and at what stage the progress is. Customers are welcome to call any time to view the progress, or we can forward stage photographs on a daily basis.

We believe the best way to advertise is by word of mouth and recommendation — so delivering the best possible service matters to us. Remember that quality refurbishments can reduce the capital outlay of new equipment, reducing your operating costs.

Thank you for your time — we look forward to working with you.

Talk to us about your machinery.

Opening hours

Monday – Thursday
08:00 – 17:00
Friday
08:00 – 16:00
Saturday
By appointment
Sunday
Closed

Trust L & R

Registered Company in England and Wales

Company Number : 7036648

Workshop

L & R Site Services Ltd

Unit 21G, Blythe Business Park
Cresswell
Stoke-on-Trent
Staffordshire
ST11 9RD
Get directions